Disney

Underwater Sack Race

Mix craft and play as you create your very own sacks inspired by Dory and Nemo!

Once your sacks are ready, hop inside and get ready to take part in an underwater race against your finned friend!

Players: 2+
What You'll Need
  • Blue pillowcase
  • Dark blue material
  • Yellow material
  • Orange pillowcase
  • Black material
  • Fabric glue
  • Scissors
How To Make It
Step 1 / 9
  • FD_pillow_step_02

    To make your Dory inspired sack, cut two symmetrical shapes from the dark blue material. This will line up to the edges of the pillowcase, so you’ll need a long, straight edge and a short bottom

    Cut a curved shape on the other edge (see the picture)

  • FD_pillow_step_03

    Glue the material to your pillowcase and leave to dry

  • FD_pillow_step_05

    Cut a small rectangle from the dark blue material, and a smaller one from the yellow material

    To make the fins, cut out two triangle shapes from the pillowcase’s inner tab

    Fold the yellow material over the dark blue material, and fold again over the widest part of the triangle (see the picture), then stick together with glue

  • FD_pillow_step_06

    Glue the narrow end of the triangle to the middle of the sides of the pillowcase and leave to dry

  • FD_pillow_step_09

    To make your Nemo inspired sack, cut out two symmetrical pieces of black material. Like Dory, this will line up to the edges of the pillowcase, so you’ll need a long, straight edge and a short bottom.

    Cut a curved shape on the other edge (see the picture)

  • FD_pillow_step_08

    Do the same with the white material, but make the shapes a little smaller, as they will sit on top of the black

    Layer the pieces of material on your pillowcase, glue and leave to dry

  • FD_pillow_step_13

    To make the fins, cut out two triangle shapes from the pillowcase’s inner tab. (Remember to make one smaller to represent Nemo)

    Cut a small rectangle from the black material and fold it over the widest part of the triangle (see the picture) and glue together

  • FD_pillow_step_07

    Finally, glue the narrow end of the triangle to the middle of the sides of the pillowcase and leave to dry

  • FD_pillowcase_3_1600x1067

    You’re now ready to race!

Print Instructions

You may like: